Belkin extender is the ultimate solution to fix the WiFi connection issues. You just need to set up your Belkin WiFi range extender to eliminate the WiFi signal dead zone. But sometimes, users encounter problems with Belkin extenders like Belkin extenders flashing orange lights or Belkin router solid amber lights after Belkin setup due to technical glitches. To fix the orange light on Belkin Router, you need to update the extender firmware or reconnect the extender to the WiFi network. To do so, you need to log in to Belkin range or 192.168.206.1 extender admin panel.
Reasons for Orange Light on Belkin Router Error
Following are the reasons for the Belkin extender orange light error:
- Incorrect setup of the Belkin extender.
- Wrong login credentials.
- Poor WiFi signals.
- Outdated or corrupted firmware.
- Location of the extender.
- Hardware issues.

Troubleshooting: Orange Light on Belkin Router
After knowing the possible reasons for the orange light on the Belkin extender, you can easily fix the issues. Following are the troubleshooting tricks to resolve the Belkin router solid amber light.

Solution 1: Follow the correct steps to set up the Belkin WiFi range extender
An incomplete setup of the Belkin range extender can cause Orange lights on Belkin Router. Therefore, follow the correct steps to complete the Belkin WiFi range extender:
- First of all, connect your Belkin extender to the power source and turn it on.
- Now, take an ethernet cable to connect your Belkin extender to the router.
- Then, connect your extender to the computer or laptop through another ethernet cable.
- Open a web browser on your computer or laptop and enter Belkin.range or 192.168.206.1 in the URL bar of the web browser.
- Hit the enter key and move to the login window. Enter your default login credentials and tap on the login button.
- Go to the setup and carefully follow all the on-screen instructions to complete the Belkin WiFi range extender setup.
Solution 2: Power cycle the Belkin extender and router
Sometimes, simply power cycling the wireless network can fix the orange LED lights on the Belkin extender. Following are the steps to power cycle the wireless network:
- Disconnect the Belkin extender from the power socket.
- Disconnect the router and the modem from the power socket.
- You need to wait for 2 minutes and then plug in your modem.
- After that, plug in the router and extender.
Wait for a blue light on the extender. If still your Belkin extender is stuck on the orange light, then proceed with the next solution.

Solution 3: Relocate Extender if Orange Light on Belkin Router
If Belkin shows orange light on Belkin Router after setup, then you need to relocate your WiFi range extender near the router. Physical obstacles like the drawer, cabins, glass doors, mirrors, metallic objects, thick ceiling or wall, or electronic devices like microwave ovens, cordless phones, Bluetooth speakers, baby monitors, refrigerators, and so on can cause wireless network interference. Therefore, place your Belkin WiFi range extender away from these devices.
Solution 4: Connect your Belkin Extender to the WiFi Network again
If you have changed the WiFi password, then you need to update it on the extender. If you don’t update the password on the extender, then you can encounter a solid amber light error. Reconnect the extender to the WiFi network to fix the Belkin router solid amber light after Belkin setup:

- Connect your computer to the Belkin WiFi range extender through an ethernet cable or wirelessly.
- Open a web browser on your device and enter Belkin.range in the address bar of the web browser.
- If the web address is not working, then enter the 192.168.206.1 IP address and press the enter key.
- Move to the login Window and enter your login username and password in the given field.
- Tap on the login button and navigate to the home page.
- Select the “Belkin setup wizard” option under the “wireless” tab.
- Choose the network name and type the WiFi password in the given slot.
- Finally, hit the apply or save button to save changes.
Solution 5: Update the extender firmware
Sometimes, Belkin WiFi range extenders don’t work because of outdated or corrupted firmware. You can see a solid orange light on Belkin Router. Following are the steps to update Belkin extender firmware:
- Connect your extender to the computer and open a web browser.
- Now, enter Belkin.range or 192.168.206.1 in the URL bar of the web browser and press the enter key.
- Enter your login details and navigate to the status page.
- Tap on the firmware update button and proceed with the next step.
- When the system prompts you to enter the password, leave the password field blank and tap on the submit button

- After that, go to the “check for firmware update” tab and see if the updates are available.
- Download the updates and move to the “firmware update” tab. Tap on the choose file or browse button.
- Search for the recently updated firmware file and tap on the open button.
- Select the upgrade option and tap on the ok button to start the firmware update process.
- It will take one or two minutes. After completing the update process, restart your computer and extender to apply changes.
Solution 6: Check the hardware connection
Ensure that your Belkin WiFi range extender is properly connected to the router. Always prefer a wired connection to connect your Belkin WiFi range extender to the router and computer system. Ensure that all the ethernet or network cables are working properly. If any wire is faulty or damaged, then you need to replace that wire immediately. Try to connect the Belkin extender to a different power socket to fix the hardware issues.
Solution 7: Check the internet connection (Orange Light on Belkin Router)
Ensure that you are receiving a high-speed internet connection. Contact your internet service provider to fix the internet connectivity issues.
Solution 8: Reset the Belkin WiFi range extender to factory default settings
If the above solutions are not working, then try to reset your Belkin WiFi range extender to factory default settings to fix the Belkin router solid amber light error. Following are the steps to reset the Belkin range extender to factory default settings:

- Connect the extender to the power source and turn it on.
- Now, take a sharp paperclip or needle and locate the reset button on the Belkin extender.
- Press and hold the reset button for 10-15 seconds.
- Release the reset button and wait for a few seconds. The Belkin WiFi range extender will restore the factory default settings.
- When you see a blue light on your extender, configure your extender with the default login username and password.